Choose your country or region
Menu
MBL Grease Superior Lubricant (450g)

MBL Grease Superior Lubricant (450g)

The latest in lubrication technology

MBL Grease Superior Lubricant is highly concentrated for domestic, commercial and industrial applications. MBL Grease is an Extreme Pressure Grease with a Lithium Complex Base. It is extremely resistant to water wash-out and has an operating range from -40°C to +280°C, is excellent from hot to cold conditions and has a wide range of speed applications.

MBL Grease is a high performance product that can be used for universal joints, suspension and steering joints, wheel bearings, electric motor bearings, hoist and conveyor bearings, axles and bushes, winches and gearboxes (where grease is specified). The unique properties of the micro-metallic particles provide lubrication, film strength and heat dissipation. Many operators are reporting that they once greased machinery on a daily basis but are now lubricating the same machinery every third to fourth day due to the unmatched qualities of MBL Grease.

Use sparingly
Do not mix with other greases

There are many operators who would normally grease their machinery on a daily basis. They are now lubricating that same machinery every third or in some cases, every fourth day. To get the full benefit from MBL Grease use it sparingly. It has a tremendous operating range, working down below freezing and up to very high temperatures with exceptional results.

Some grease bases may not be compatible with a Lithium Complex Grease, e.g., clay or Bentonite Grease. If possible, ensure that all previous grease is cleaned from the components to be greased and from the grease gun before using MBL Grease. This will ensure that you receive the maximum benefit from this exceptional grease.

When greasing bearings, particularly high speed bearings, it is important not to fill the air space more than one quarter to one third full of grease to allow expansion and to allow the grease to move with the bearings for proper lubrication.

WAS $28.00
NOW $24.00
Resists water and water washout
Provides oxidation stability
Protects against rust
Protects against extreme pressure
Works well with high loading or severe shock loading
Extends lubrication periods
Prevents excessive seal swelling

Why MBL Grease?

For 40+ years the MBL Grease Superior Lubricant has been delivering proven results to thousands of customers all over the world. This innovative formula is highly concentrated and science backed and is proven to have superior oxidation stability, improved water resistance, rust and corrosion protection, high load carrying capability and nylon bearing cage compatibility.

  • MBL Grease has a Lithium Complex base.
    It features an operating range of -40°C (-40°F) to an incredible 280°+C (500°+F). Most current Lithium base greases have a maximum operating temperature of 120°C (250°F), while some new Lithium Complex greases have maximums of 180°C (360°F) in a mineral oil and 230°C (430°F) in a synthetic oil. The maximum continuous operating temperature of MBL Grease is 205°C (400°F).
  • Contains micro-metallic particles
    The micro-metallic particles dispersed throughout the MBL Grease are spherical in shape and act as millions of tiny ball bearings between two surfaces, greatly reducing friction. Under high pressure application, these spherical micro-metallic particles are deformed and flattened to fill up any pits, scores or irregularities which occur in the surfaces to be lubricated. The unique properties of the micro-metallic particles provide lubrication, film strength and heat dissipation.

Anything else you
need to know?

The Lithium Complex soap structure with a micro metallic base lubricity matrix provides good high-temperature performance characteristics. In many conventional greases, load carrying additives normally limit high temperature performance but MBL Grease retains this feature whilst continuing to provide extreme pressure protection. MBL Grease provides dependable lubrication at low temperatures. Low temperature torque tests conducted at -40°C (-40°F) show MBL Grease to be suitable for use at temperatures at or above this level. The ability to retain a relatively soft consistency at low temperatures means that cold weather dispensing problems are minimised. MBL Grease has extreme pressure and anti wear characteristics that enable it to serve under conditions of high loading or severe shock loading.

Product contains petroleum oil, copper and lead particles, Do NOT store near heat, sparks or flame. Wash with soap and water after contact with skin. KEEP OUT OF REACH OF CHILDREN. A Material Safety Sheet is available from Pro-Ma Systems.

folder icon
folder icon
Product info sheet
DOWNLOAD NOW
folder icon
folder icon
Safety data sheet
DOWNLOAD NOW

Do NOT take internally. Harmful or fatal if swallowed. Contains petroleum oil, copper and lead particles and hydrocarbons. Wash hands after use. If swallowed, do NOT induce vomiting. Call physician immediately.

The Base Grease Used in MBL Grease has the Following Specifications:
NLGI Grade
2
Soap Type
Lithium-complex
Texture
Buttery
Base oil viscosity
cSt at 40°C
148
cSt at 100°C
14
SUS at 100°F
767
SUS at 210°F
75
Base oil viscosity index
90
Dropping point C (F) (ASTM D 2265)
280°+C (500°+F)
Penetration, mm/10 (ASTM D 217)
Unworked
280
Worked 60 Strokes
285
Worked 100,000 strokes, % change
+10
Trident probe viscosity (ASTM D 3232)
204°C (400°F), poises
15
Oil Separation (ASTM D 1742)
24 hr at 25°C (77°F), %
3
Lubrication life (ASTM D 3336), no. 204 bearing
10,000 rpm, 163°C (325°F), hrs
290
Oxidation stability (ASTM D 942)
Pressure drop at 100 hr, kPa (psi)
14(2)
Pressure drop at 500hr, kPa (psi)
70 (10)
Roll stability (ASTM D 1831) % penetration change
+10
Wheel bearing test (ASTM D 1263 modified: 60-9 pack 160°C (325°F)
Leakage, g
.1.5
Load carrying properties:
Timken load (ASTM D 2509,kg (lb)
25 (55)
4-Ball EP test (ASTM D 2596)
Load wear Index, kg
40
Weld point, kg
250
4-Ball wear test (ASTM D 2266), 40kg, 1200rpm,
75°C (167°F), 1 hr. Wear scar diameter, mm
0.40
Ball-joint test (ASTM D 3428)
Brine sensitivity (noise and wear)
Pass
Torque stability
Pass
Water washout (ASTM D 1264), % at 80°C (175°F)
4
Rust prevention (ASTM D 1743), ASTM rating
1
Low temperature torque (ASTM D 1478), -40°C (-40°F)
Starting, g-cm
13,000
Running, g-cm
5,000
Mobility (U.S. Steel method)
Flow rate at -18°C (0°F), g/sec
0.5
Rubber swell (GM method) 70hr at 100°C (210°F)
Volume change, %
+12

The Lithium Complex soap structure with a micro metallic base lubricity matrix provides good high-temperature performance characteristics. In many conventional greases, load carrying additives normally limit high temperature performance but MBL Grease retains this feature whilst continuing to provide extreme pressure protection. MBL Grease provides dependable lubrication at low temperatures. Low temperature torque tests conducted at -40°C (-40°F) show MBL Grease to be suitable for use at temperatures at or above this level. The ability to retain a relatively soft consistency at low temperatures means that cold weather dispensing problems are minimised. MBL Grease has extreme pressure and anti wear characteristics that enable it to serve under conditions of high loading or severe shock loading.

Product contains petroleum oil, copper and lead particles, Do NOT store near heat, sparks or flame. Wash with soap and water after contact with skin. KEEP OUT OF REACH OF CHILDREN. A Material Safety Sheet is available from Pro-Ma Systems.

folder icon
folder icon
Product info sheet
DOWNLOAD NOW
folder icon
folder icon
Safety data sheet
DOWNLOAD NOW

Do NOT take internally. Harmful or fatal if swallowed. Contains petroleum oil, copper and lead particles and hydrocarbons. Wash hands after use. If swallowed, do NOT induce vomiting. Call physician immediately.

The Base Grease Used in MBL Grease has the Following Specifications:
NLGI Grade
2
Soap Type
Lithium-complex
Texture
Buttery
Base oil viscosity
cSt at 40°C
148
cSt at 100°C
14
SUS at 100°F
767
SUS at 210°F
75
Base oil viscosity index
90
Dropping point C (F) (ASTM D 2265)
280°+C (500°+F)
Penetration, mm/10 (ASTM D 217)
Unworked
280
Worked 60 Strokes
285
Worked 100,000 strokes, % change
+10
Trident probe viscosity (ASTM D 3232)
204°C (400°F), poises
15
Oil Separation (ASTM D 1742)
24 hr at 25°C (77°F), %
3
Lubrication life (ASTM D 3336), no. 204 bearing
10,000 rpm, 163°C (325°F), hrs
290
Oxidation stability (ASTM D 942)
Pressure drop at 100 hr, kPa (psi)
14(2)
Pressure drop at 500hr, kPa (psi)
70 (10)
Roll stability (ASTM D 1831) % penetration change
+10
Wheel bearing test (ASTM D 1263 modified: 60-9 pack 160°C (325°F)
Leakage, g
.1.5
Load carrying properties:
Timken load (ASTM D 2509,kg (lb)
25 (55)
4-Ball EP test (ASTM D 2596)
Load wear Index, kg
40
Weld point, kg
250
4-Ball wear test (ASTM D 2266), 40kg, 1200rpm,
75°C (167°F), 1 hr. Wear scar diameter, mm
0.40
Ball-joint test (ASTM D 3428)
Brine sensitivity (noise and wear)
Pass
Torque stability
Pass
Water washout (ASTM D 1264), % at 80°C (175°F)
4
Rust prevention (ASTM D 1743), ASTM rating
1
Low temperature torque (ASTM D 1478), -40°C (-40°F)
Starting, g-cm
13,000
Running, g-cm
5,000
Mobility (U.S. Steel method)
Flow rate at -18°C (0°F), g/sec
0.5
Rubber swell (GM method) 70hr at 100°C (210°F)
Volume change, %
+12

Proven results

Featured products

Related Products

MBL3 Spray (250mL)

Three Stage Action Spray that penetrates, lubricates and plates.

$27.50
MBL8 Concentrated Oil Additive (250mL)

Increase horsepower and fuel economy, reduce emissions and reduce engine and gear wear.

WAS $35.00
NOW $30.00
PT5 Plus Petrol Treatment with Ethanol Defence (500mL)

Australian government validated tests revealed a 9% increase in horsepower, 13% improvement in thermal efficiency and 13% improvement in fuel economy

$28.00
DT5 Plus Diesel Treatment (1L)

Improves performance and fuel consumption. Cleans injectors, helps to extend fuel filter life and reduces exhaust smoke and sludge

$43.50

mbl-grease-450g

Bag = (Items: )

VIEW BAG
resultsTotal items = 0
xxlastPoductId = undefined
xxlastPoductName = undefined
xxlastPoductQuantity = undefined
{"currentStoreId":"a0q2v00000Sye9eAAB","email":"","mobile":"","checkOutStep":"/cart","products":[]}

×

Your Rewards